6 comments

  • Sesse__ 11 minutes ago
    My ThinkPad (X280) has a much simpler way of dealing with this: There's a tiny hole in the bottom, and if you stick something sharp into it and hold for a while, the embedded controller will reboot (or was it turn off?).

    It basically saved me from buying a new laptop at some point, when it completely refused to charge the battery for whatever weird reason (it would charge for a second or so, and then cut off, then the charger would restart it, new cut, etc.).

  • Freestyler_3 24 minutes ago
    Its a standard step in troubleshooting "bricked" devices, not specifically the amount of pushes but the unplug any power source and then hit the power on button to discharge power left in the system (caps)
    • pockybum522 18 minutes ago
      Correct on all counts. Static discharge is a strange way for the article (and tech on the phone) to say discharging capacitors but that's what it's doing.
  • ddtaylor 4 minutes ago
    I'm currently using an Omen that "died" because I opened and cleaned it without properly discharging and slightly buzzed a random chip, which happened to be the embedded controller that operates before the BIOS does. This is basically the reason you can use USB and do some other stuff before your laptop is actually on. The problem is that when I touched that chip I scrambled some bits that stay powered via a separate internal battery that cannot be disconnected.

    At the time I did not know the secret power trick for this laptop, which is a similar way of holding the power button while inserting the charger. Instead I tried a few things and gave up because the behavior was inconsistent and frustrating. I stuffed it in a drawer and moved on with other things for a few months.

    Randomly probably two months later I opened that drawer and went "oh yeah", then proceeded to kind of just get back into the same mindset of the problem and make sure I remember it correctly, since I'm too lazy to keep notes sometimes. To my rekindled frustration I pressed the power button and it came on normally - minus a BIOS battery CMOS time thing. Sure, I was happy it worked, but I now randomly think about the fucking hours of dedicated and methodical attempts at isolating hardware components that had potentially failed in vain because this piece of shit was now running some scrambled undefined behavior code on a shadow chip.

  • ImPleadThe5th 14 minutes ago
    I have a dead Lenovo gaming laptop that has been sitting around for the last year. Literally just tried this. And it posted for the first time since it bricked and booted right into my drive once I plugged it back in.

    I knew about discharging capacitors and tried holding the power button down and pulsing it before. But I guess this time its magic?

    I bet it'll stop working again shortly, but was funny to see.

  • haritha-j 39 minutes ago
    Not limited to thinkpads by any means, this is I believe common to most laptops. On my last MSI (no removable battery), the trick was to unplug, hold down the power button for 30 seconds, maybe press the power button a couple of times. I froget what the issue it fixed was, but it wasn't totally dead. but the logic was static discharge.
    • varispeed 33 minutes ago
      That was the standard way to power up my Dell XPS as otherwise it wouldn't. Such a chore. So many stand ups missed because it would often take half an hour for it to "click" and power on.
  • aa-jv 16 minutes ago
    My washing machine has a 'secret reset' code .. unplug it for 30 seconds, plug it back in, open and close the door 10 times, wait .. reboots.

    I kind of wonder, every time, whether this is a uboot thing.

    What a world we live in that our washing machines have a magic-sysreq thing going on ..